ID Card Printer System - Fargo HDP600

ID Card Printer System - Fargo HDP600 .

High Definition Card Printer/Encoder
Brochure

Produces high-security smart cards that meet FIPS 201 and other federal standards for government and corporate ID applications.

Supports advanced smart card applications by encoding up to three embedded technologies, plus magnetic stripe.
Prints dual- or single-sided, encodes and laminates cards with embedded electronics, all in one pass.
Deters counterfeiting with tamper-evident High Definition Printing® (HDP®) Film and holographic overlaminates.

HDP600 System

Protect your photo ID smart cards — and your entire card issuance process
— with a combination of Fargo Secure software and hardware.
Learn more »

This is a summary of selected HDP600 specifications.
For complete specs, download the HDP600 spec sheet.

Printing technology:		HDP® dye-sublimation / resin thermal transfer
Resolution:		300 dpi (11.8 dots/mm)
Colors:		Up to 16.7 million / 256 shades/pixel
Print speed:		44 – 80 seconds per card, depending on ribbon type and lamination
Accepted standard card sizes:		CR-80
Print area:		Over-the-edge on CR-80 cards
Input hopper card capacity:		200 cards (.030” / .762mm thick)
Output hopper card capacity:		100 cards (.030” / .762mm thick)
Encoding options:		Magnetic stripe: ISO high- and low-coercivity, JIS II Contactless smart card: HID iCLASS, MIFARE, DESFire Contact smart card: read/write all ISO7816-1/2/3/4 HID proximity (read-only)
Options:		Card lamination module Card encoding modules External print server (Windows® only, parallel port only) Printer cleaning kit

Smart card encodingg

Comprehensive security applications frequently combine photo IDs with some type of technology or “smart” cards. With optional modules, Fargo’s Professional Series printer encoders can encode up to three smart card technologies in one pass: contact and contactless smart card, mag stripe, and proximity card (read-only.)

Learn more »

High Definition Printing™ Technology

The uneven surface of smart cards presents a challenge to traditional dye-sublimation card printers. But Fargo’s High Definition Printing™ Technology overcomes this problem while increasing card security with a tamper-evident image.

Learn more »

Optional lamination module

Photo ID cards are often subject to extra wear and tear; especially when they’re used for access control or employee services. The optional lamination module not only makes your cards more durable, it can add a critical layer of security that’s extremely difficult to forge.

Optional external print server

With its optional external print server and Ethernet connectivity, the HDP600 brings secure printing/encoding to networked or distributed ID card issuance for government, large corporations and service bureaus.
Learn more »

			Contact Briell on +61-2-9986 3911 or email us at sales@briell.com.au